If you look at the surface of the sports floor, you can see one piece. The structure of the tiles can be only detected only on closer inspection. The impression of homogeneity originates from the high-precise manufacturing of the tiles - they interlock with each other without any open seam and the edges are cut without a chamfer.
That's why the sports floor is suitable for all sports areas, where the highest requirements regarding functionality and design have to be met. The sports floor can be used indoors and outdoors. In case of an outdoor application, an extensively water-permeable base course has to be laid, e.g. a plastic honeycomb grid.
This sports floor is naturally joint-friendly elastic, slip-resistant and provides fall protection. It dams mechanical vibrations and provides a good ball bounce. In the open air it's frost-resistant and water-permeable, so it can be used for playing in all weathers. This product has been manufactured with an enhanced concentration. Thus, it's more resistant against abrasion and mechanical loading, but it's less elastic and open-pored and the damping is worse. It's recommended for surface with normal and enhanced loading.
Discount:
- 122,96 € / m²
- (16 piece / Set 2,55 kg / piece)
-
Realisation time approx.
4-6 weeks
Properties
Colour Pale green The product's wear layer in the colour design Pale green is made of a well-measured layer of a unicolour, homogenously imbued EPDM granulate in the colour Pale green (like RAL 6021). EPDM (Ethylene Propylene Diene Monomer) is a colourfast, UV resistant and weatherproof elastomer used to manufacture high-quality products. The products in the colour design Pale green are particularly colour stable.
material The coloured rubber granulate of the wear layer is a newly manufactured, fully colourful EPDM (Ethylene Propylene Diene Monomer) with max. edge length of 4 mm. The bottom layer of the two-layered, but monolithically (from one piece) manufactured tile is made of a black tyre rubber granulate - Styrene Butadiene Rubber, SBR. This complex structure is especially favourable for the physical properties and durability of the element.
Assembly Every tile is cut out of a larger format with the highest precision. So the zip toothed strip arises that makes a form-fit connection between the adjacent plates while laying. They build a seamless, connected, positionally stable tile carpet of high durability and loadability. Since the plates' edges are sharply cut, the single tiles in the surface are hardly visible in case of the same colour design.
Structure of the underside
Characteristics
Colourfast and UV resistant
Material and colour are resistant against UV radiation during weathering in a long-term perspective.
Hygienically harmless for humans and animals
No prohibited pollutant emissions. Virtually odourless (initial odour evaporates).
Quickly and simply laid
Easy mounting without special expert knowledge on bound of fixed base courses.
It's rentable and brings joy
The flooring for more comfort and better feeling.Original WARCO product with warranty.
Weatherproof - in the open air and in buildings
For applications in the open air and under roof. Avoid waterlogging and permanent drenching.
Low-flammable (cfl-s1)
Building material class Cfl-s1 (EN 13501-1), B1 (DIN 4102-1) low-flammable, low production of smoke.
Suitable for chlorinated water
Resistant against chlorinated water or cleaners and suitable for laying at a swimming pool.