Corner end tile Pro (4 pieces) BZ "Anthracite"

11,50 €

7-14 days

Plus delivery costs
/
Realisation time approx.
7-14 days
52,04 € / m²
(4 piece / Set 0,90 kg / piece)

EAN: 4251469348202 | Item no.: 4820

In order to ensure that the corner end tiles fit perfectly with the whole tiles of the same delivery, they are cut from the tiles of the same order. Therefore, exchange is not possible. The set contains 4 pieces!

The corner end tile is a quarter of a full tile with a straight outer edge on 2 sides. Laying corner end tiles saves time and money if the size of the tile surface is determined by the size of the tiles. There is no cutting on site and the tile surface is framed by half tiles. The corner end tile is used in combination with the edge end tile. This product has been manufactured with an enhanced concentration. Thus, it's more resistant against abrasion and mechanical loading, but it's less elastic and open-pored and the damping is worse. It's recommended for surface with normal and enhanced loading.

The product data sheet to print

Corner end tile Pro (4 pieces) von WARCO im Farbdesign Anthracite mit den Abmessungen 235 x 235 x 18 mm. Produktfoto von Artikel 4820 in der Aufsicht von schräg vorne.

Großaufnahme vom Verbindungssystem von WARCO-Boden 4820 - Corner end tile Pro (4 pieces) im Farbdesign Anthracite. Abmessungen 235 x 235 x 18 mm.

Aufsicht auf die Unterseite, also die Bodenseite von WARCO-Formteil 4820 - Corner end tile Pro (4 pieces) im Format 235 x 235 x 18 mm.

Typische Verlegung oder Einbausituation für den Artikel 4820 von WARCO - Corner end tile Pro (4 pieces), Farbton Anthracite in der Abmessung 235 x 235 x 18 mm.

Anthracite (active)
Marrón chocolate + 0,90 €
Brick red + 0,90 €
Slate grey + 1,90 €
Grass green + 1,90 €

Package dimensions

470 x 470 x 18 mm

The packaging dimensions include the dimensions of the mounting system.

Compare

Discount:

Calculation of quantity

0 m²

0 Set

The product data sheet to print

The advantages of WARCO

Limitedly UV resistant

The ageing and lifetime of the product depend on the intensity of the UV radiation (sunlight).

Hygienically harmless for humans and animals

No prohibited pollutant emissions. Virtually odourless (initial odour evaporates).

For weatherproof areas, also outdoors

For weatherproof areas, but also outdoors. Avoid waterlogging and permanent drenching.

Normally inflammable (efl)

Building material class Efl (EN 13501-1), B2 (DIN 4102-1). Authority denomination: normally inflammable.

Colour
Anthracite

A car tyre is made of black dyed rubber (SBR). That's why the rubber granulate made of car tyres is also black. During processing with a colourless binder, black products are made. Similarly to the car tyres, the colour changes in these products after a short time from full black to a dark grey, also known as anthracite.

Material

The rubber granulate with irregularly formed particles is obtained from discarded tyres. It mainly consists in the high-valuable mix of natural rubber (NR) and synthetically manufactured Styrene-Butadiene Rubber (SBR). The material properties of the WARCO preform largely correspond to those known from SBR. The granulate with an edge length from 1.0 to 3.0 mm creates fine-grained surfaces.

Assembly or connection system

The edges of every tile are formed as a zip toothed strip (dovetail joint). Due to the interlocking of the plates during the laying and the form-fit connection arising this way, a permanently connected, positionally stable tile carpet. That's why the plates (normally) aren't connected with (pasted to) the base course. The connection of the rubber granulate tiles as a zip is particularly stable, durable and safe.

Structure of the underside

A network of 4 mm deep drainage channels across the elements is formed into the bottom side of the tiles - the one in contact with the base course. The tiles are mounted on an appropriate bound base course. Please take note of the laying instruction.