Corner end tile Pro (4 pieces) BZ "Savannah"

21,30 €

7-14 days

Plus delivery costs
/
Realisation time approx.
7-14 days
96,38 € / m²
(4 piece / Set 0,90 kg / piece)

EAN: 4251469347328 | Item no.: 4732

In order to ensure that the corner end tiles fit perfectly with the whole tiles of the same delivery, they are cut from the tiles of the same order. Therefore, exchange is not possible. The set contains 4 pieces!

The corner end tile is a quarter of a full tile with a straight outer edge on 2 sides. Laying corner end tiles saves time and money if the size of the tile surface is determined by the size of the tiles. There is no cutting on site and the tile surface is framed by half tiles. The corner end tile is used in combination with the edge end tile. This product has been manufactured with an enhanced concentration. Thus, it's more resistant against abrasion and mechanical loading, but it's less elastic and open-pored and the damping is worse. It's recommended for surface with normal and enhanced loading.

The product data sheet to print

Corner end tile Pro (4 pieces) von WARCO im Farbdesign Savannah mit den Abmessungen 235 x 235 x 18 mm. Produktfoto von Artikel 4732 in der Aufsicht von schräg vorne.

Großaufnahme vom Verbindungssystem von WARCO-Boden 4732 - Corner end tile Pro (4 pieces) im Farbdesign Savannah. Abmessungen 235 x 235 x 18 mm.

Aufsicht auf die Unterseite, also die Bodenseite von WARCO-Formteil 4732 - Corner end tile Pro (4 pieces) im Format 235 x 235 x 18 mm.

Typische Verlegung oder Einbausituation für den Artikel 4732 von WARCO - Corner end tile Pro (4 pieces), Farbton Savannah in der Abmessung 235 x 235 x 18 mm.

Savannah (active)
Anthracite - 9,80 €
Marrón chocolate - 8,90 €
Brick red - 8,90 €
Grass green - 7,90 €

Package dimensions

470 x 470 x 18 mm

The packaging dimensions include the dimensions of the mounting system.

Compare

Discount:

Calculation of quantity

0 m²

0 Set

The product data sheet to print

The advantages of WARCO

Colourfast and UV resistant

Material and colour are resistant against UV radiation during weathering in a long-term perspective.

Hygienically harmless for humans and animals

No prohibited pollutant emissions. Virtually odourless (initial odour evaporates).

For weatherproof areas, also outdoors

For weatherproof areas, but also outdoors. Avoid waterlogging and permanent drenching.

Low-flammable (cfl-s1)

Building material class Cfl-s1 (EN 13501-1), B1 (DIN 4102-1) low-flammable, low production of smoke.

Suitable for chlorinated water

Resistant against chlorinated water or cleaners and suitable for laying at a swimming pool.

Colour
Savannah

The colour design is based on the pastel beige typical for the African savannah and lime green colour hues on a black base. The products in the colour design Savannah are made of a fully colourful EPDM granulate - colourful through and through. EPDM (Ethylene Propylene Diene Monomer) is a UV resistant, weatherproof and especially robust rubber. The subtle and pleasant colour design Savannah fits every environment with its natural wood look, unintrusively and without artificial look.

Material

Arkadiusz_Sztern_dokument_dn327296fs_da154767_icon_V.png

The tile is two-layered, but monolithic (from one piece). In the rubber granulate of the wear and visible side it's a newly manufactured, imbued EPDM (Ethylene Propylene Diene Monomer). The second, bottom layer is made of the black tyre rubber granulate Styrene-Butadiene Rubber, short SBR. This complex structure is especially favourable for the physical properties and durability of the tile.

Assembly or connection system

The edges of every tile are formed as a zip toothed strip (dovetail joint). Due to the interlocking of the plates during the laying and the form-fit connection arising this way, a permanently connected, positionally stable tile carpet. That's why the plates (normally) aren't connected with (pasted to) the base course. The connection of the rubber granulate tiles as a zip is particularly stable, durable and safe.

Structure of the underside

A network of 4 mm deep drainage channels across the elements is formed into the bottom side of the tiles - the one in contact with the base course. The tiles are mounted on an appropriate bound base course. Please take note of the laying instruction.