Gym flooring BZ "Anthracite"

11,30 €

7-14 days

Plus delivery costs
/
Realisation time approx.
7-14 days
45,20 € / 4 piece / m²
(4,08 kg / piece)

EAN: 4251469302013 | Item no.: 0201

The gym flooring differentiates from other gym floors due to its especially homogenous, closed and slightly velvety to the touch, but nevertheless slip resistant surface. At the same time, the gym flooring is particularly abrasion-proof and resistant against mechanical loading - also in case of barbell dropping. It's especially suitable for movement orientated training, such as CrossFit.

The handy slabs can be easily laid without sticking on a viable base course and can be cleaned manually or mechanically. This product has been manufactured with in a high-concentrated design. Thus, it's particularly resistant against abrasion and mechanical loading, low or not water-permeable and has a homogenous surface.

The product data sheet to print

Gym flooring von WARCO im Farbdesign Anthracite mit den Abmessungen 500 x 500 x 18 mm. Produktfoto von Artikel 0201 in der Aufsicht von schräg vorne.

Detailaufnahme der Randausprägung von WARCO-Produkt 0201, Gym flooring, Format 500 x 500 x 18 mm, Farbe Anthracite.

Großaufnahme vom Verbindungssystem von WARCO-Boden 0201 - Gym flooring im Farbdesign Anthracite. Abmessungen 500 x 500 x 18 mm.

Aufsicht auf die Unterseite, also die Bodenseite von WARCO-Formteil 0201 - Gym flooring im Format 500 x 500 x 18 mm.

Typische Verlegung oder Einbausituation für den Artikel 0201 von WARCO - Gym flooring, Farbton Anthracite in der Abmessung 500 x 500 x 18 mm.

Colour

Anthracite (active)

Package dimensions

540 x 540 x 18 mm

The packaging dimensions include the dimensions of the mounting system.

Compare

Discount:

Calculation of quantity

0 m²

0 piece

The product data sheet to print

The advantages of WARCO

Limitedly UV resistant

The ageing and lifetime of the product depend on the intensity of the UV radiation (sunlight).

Hygienically harmless for humans and animals

No prohibited pollutant emissions. Virtually odourless (initial odour evaporates).

For roofed areas

Application on weatherproof areas and for use in buildings.

Normally inflammable (efl)

Building material class Efl (EN 13501-1), B2 (DIN 4102-1). Authority denomination: normally inflammable.

Colour
Anthracite

A car tyre is made of black dyed rubber (SBR). That's why the rubber granulate made of car tyres is also black. During processing with a colourless binder, black products are made. Similarly to the car tyres, the colour changes in these products after a short time from full black to a dark grey, also known as anthracite.

Material

The rubber granulate with irregularly formed particles is obtained from discarded tyres. It mainly consists in the high-valuable mix of natural rubber (NR) and synthetically manufactured Styrene-Butadiene Rubber (SBR). The material properties of the WARCO preform largely correspond to those known from SBR. A very fine granulate with an edge length from of up to 1.0 mm creates especially even surfaces.

Assembly or connection system

The edges of every tile are formed as a zip toothed strip (dovetail joint). Due to the interlocking of the plates during the laying and the form-fit connection arising this way, a permanently connected, positionally stable tile carpet. That's why the plates (normally) aren't connected with (pasted to) the base course. The connection of the rubber granulate tiles as a zip is particularly stable, durable and safe.

Structure of the underside

A network of 4 mm deep drainage channels across the elements is formed into the bottom side of the tiles - the one in contact with the base course. The tiles are mounted on an appropriate bound base course. Please take note of the laying instruction.