Rubber floor for gym and cross training box
Fitness mats and floor protection mats from WARCO protect the athletes, the floor and the equipment - whether in the gym, the CrossFit box, the gym in the office or hotel or the weight room in the sports club. Learn more about fitness mats from WARCO here.
***** Valuation
'Very good recommendation, good price-performance ratio, good quality, fast delivery and very easy to install... Top!!!'
Thomas Kiefer, System Fitness operating company | Fitness floor HZ, 500 x 500 x 40 mm, Grass green
All advantages at a glance
- Professional quality cheap directly from the manufacturer.
- Over 20 years of experience in the development and production of rubber granulate flooring.
- Functionally optimized fitness floors for different training areas in the studio.
- Competent advice - reliable service.
- Wide range of finishes and colors.
- Flammability class Efl or Cfl-s1.
- Simple, form-fitting and positionally stable installation without bonding to the substrate.
Machine or manual cleaning.
Resistant to alcoholic disinfectants.
Floor protection & impact sound insulation - Structure-borne noise and impact are absorbed and dampened.
Economical - long service life.
The best-selling WARCO floor for gym and Crossfit
The optimal floor for every training area
A training area with strength and cardio equipment has different flooring requirements than a gymnastics or free weight area. The same applies to the stretching area or functional training with TRX or the cycling room.
In addition, the conditions of the building in which the gym is located must be taken into account. In a residential and commercial building, the floor must absorb shocks, vibrations and impact sound more than in an industrial hall.
The optimum fitness floor is therefore precisely matched to the specific conditions at the place of use. WARCO therefore offers a variety of floor coverings with different parameters for fitness studios. The relevant parameters are indicated for each floor covering on a scale from 1 to 5.
Vibration damping and structure-borne sound insulation
Weight stations can be very noisy. Jumping and running in place, loud roller training equipment and dumbbell drops: there are many sources of sound in gyms. These noises, i.e. vibrations, are transmitted into the building if the floor slab is not decoupled.
This disturbs not only the fitness athletes, but also the neighbors. Dropping dumbbells and kettlebells can even cause damage to the fabric of the building.
The gym floor from WARCO provides effective acoustic and mechanical decoupling of the floor slab and the training surface. The rubber floor absorbs vibrations - structure-borne sound and noise do not occur in the first place.
When properly constructed, a WARCO rubber floor can even dissipate the kinetic energy of dropping barbells.
Despite its elasticity, the athlete stands firmly and safely on a gym floor from WARCO. Fitness equipment leaves no traces.
Whether hard workout or relaxed yoga - always on a floor from WARCO
WARCO produces fitness floors in various construction types. These differ in bulk density, thickness, material, surface and structure.
Especially for cross-training, thick fitness floors cushion dumbbells and kettlebells, dampen typical workout sounds, and acoustically decouple the training area from the building.
A fitness floor from WARCO is easy to maintain and can be kept hygienically clean by hand or with a floor cleaning device. The fitness mats are also available in fire protection class Cfl-S1.
WARCO's elastic floor protection mats provide a safe and firm footing while easily cushioning steps, jumps and thrown weights.
This rubber floor reduces the risk of falls and injuries during fitness training. Because the grippy surface is non-slip and provides fall protection.
In addition, the fitness mats insulate the surface against cold. This ensures a pleasant training experience, especially when sitting or lying on the floor.
A floor made of slightly springy, tread-elastic fitness mats enables a workout that is easy on the joints. In addition, the rubber floor is non-slip, harmless to health and also provides fall protection.
For movement-intensive training, such as boxing, there is the rubber floor with increased density. Here, the individual rubber fibers in the plate are closer together, which makes the plate more stable and the surface particularly abrasion-resistant.
The elasticity of the floor decreases slightly with increasing density, but still remains pleasantly perceptible.
The WARCO Fitness flooring is particularly economical: the initial costs are low, installation is simple and can be carried out by the user, and the rubber floor has a long service life.
This makes WARCO floor protection mats interesting not only for commercial fitness studios and cross training boxes, but also for non-profit sports and gymnastics clubs.
WARCO flooring can be laid quickly. The tiles are simply laid on the existing, load-bearing subfloor and join together positively via the puzzle teeth on the edge. The amount of work required is low, and the area coverage is high, even in angled rooms.
WARCO floor protection mats also make sense for gymnastics, aerobics or yoga. On the one hand they create a pleasant floor feeling, on the other hand they insulate against the cold of the ground.
WARCO floor protection mats are only laid out. They are not glued. A connection system in the form of small puzzle teeth, the zipper teeth, is molded into the edges of the tiles. When the tiles are fitted together, they connect without further action to form a homogeneous tile carpet.
The comparative values - The key to the optimal fitness floor
The pressing pressure during the production of a fitness mat determines the physical density of the fitness mat. In addition to the cross-section and thickness of the mat, the physical density plays a decisive role in determining the relevant parameters of the finished fitness mat.
When comparing sheets, the weight is a good reference point to conclude the physical density and thus the relevant parameters. When comparing, of course, the format, thickness and cross-section of the plates must also be taken into account.
Knowledge of these relationships is the prerequisite for an informed selection of suitable fitness floor coverings for a gym.
As an example of the relationship between physical density, format, thickness and weight on the one hand and the relevant properties on the other, you will find the comparative values of various typical fitness floor coverings in the following overview. Use the comparative values given in the product description when selecting your fitness mats.
Weight 1.95 kg • Format: 50 x 50 cm • Thickness: 8 mm
Fitness floors in comparison - surfaces, feel, properties
In addition to the physical density, the material used, the thickness and the cross-section are responsible for the properties of a fitness mat.
Four examples show in comparison the variety of surfaces of WARCO fitness floors.
Fitness mat GZ
The GZ fitness mat looks as if it has been cast from a single piece, with no visible joints, as the connecting teeth of the mats are formed with high precision and without chamfers at the edges.
The GZ fitness mat is available in thicknesses of 8 and 16 mm and in 5 attractive color designs. It is highly resistant to mechanical stress and abrasion and has a homogeneous surface that is pleasantly natural to the touch.
The GZ fitness mat is highly compressed and versatile, e.g. for cycling and cardio areas, changing rooms and lounges.
Fitness floor protection mat BZ
With a thickness of just 18 mm, the BZ fitness floor protection mat offers a good balance between elasticity, impact sound insulation, durability and investment costs.
The BZ fitness floor protection mat is often used in classrooms and gymnastics rooms for yoga, Zumba or high intensity interval training, as well as under vibration-intensive equipment.
The surface of the BZ fitness floor protection mat is open-pored and slip-resistant. It is non-slip and slightly rough to the touch.
Gym flooring TZ
TZ gym flooring has a velvety surface. It is manufactured in thicknesses of 30 and 40 mm. The tiles are pressed under high pressure with fine SBR rubber granules. The result is a compact, virtually waterproof and mechanically highly resistant tile.
The TZ gym flooring is recommended for areas that are used intensively and with intensive movement or with dumbbells and kettlebells. TZ gym flooring is also a very good choice for the CrossFit box.
Fitness floor protection mat pro TZ
The fitness floor protection mat pro TZ is available in 20 color variants, three thicknesses and two formats. The addition "pro" stands for professional and refers to the increased physical density of the tiles. As a result, the floor offers a particularly balanced ratio of the relevant properties, especially elasticity and durability.
The surface has the pleasant feel of grained leather. In the sports hall, the fitness floor protection mat pro TZ can be used universally in almost all areas.
WARCO fitness flooring - the better training floor
- Insulation - against sound, impact, shock, vibration
- Protection - for athletes, training equipment and building
- Safety - non-slip, slip-resistant, integrated fall protection
- Comfort - thermal insulation, pleasant barefoot feeling
- Selection - function, material, design, price
- Cost-effectiveness - simple installation, long service life